xscorpion 6.25 cross flow turbo fan [tf8]

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134611
Printed Date: May 03, 2025 at 8:32 AM

Topic: xscorpion 6.25 cross flow turbo fan [tf8]

Posted By: myonus
Subject: xscorpion 6.25 cross flow turbo fan [tf8]
Date Posted: July 27, 2013 at 5:53 PM

HelloI am installing a Xscorpion 6.25 Cross-flow Turbo Fan [TF8] for cooling purposes. How would I determine to correct recommended fuse for this device? The manufacturer dosne't have any specific specs, and would hate to choose somthng too high or too low. Any advice? -Myonus

-------------
Be not guided by morality, but rather, integrity.

Replies:

Posted By: Ween
Date Posted: July 27, 2013 at 9:35 PM

power it up with an ammeter in series. you could block the outlet side slightly so as to load the motor with back pressure. read the value, add 25 to 50%. or fuse it at 1 amp?
M

Posted By: myonus
Date Posted: July 27, 2013 at 10:24 PM

Ween] wrote:

power it up with an ammeter in series. you could block the outlet side slightly so as to load the motor with back pressure. read the value, add 25 to 50%. or fuse it at 1 amp?
M

Thanks, I understand totally, however I don't have an ammeter, is there any shade-tree mechanic solution you could recommend?

-------------
Be not guided by morality, but rather, integrity.

Print Page | Close Window