soldering assembly services
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136966
Printed Date: May 01, 2024 at 6:46 PM
Topic: soldering assembly services
Posted By: whiskeymike
Subject: soldering assembly services
Date Posted: July 18, 2014 at 2:37 PM
Not sure if this would be considered off topic, but hoping some of you can point me the right direction.
I have a simple product that I've prototyped and need short run assembly services to make 500-1000 units. The work is very simple and consists of soldering 4 joints of 8 wires, heat shrinking the joint. I've googled for companies that would do such a thing, but have come up empty. I've found a bunch of PCB printing companies, etc.. but nothing as simple as manpower to assemble these units.
Any ideas of where I could find this? It would be great if they were in the states, but outside might work as well.
Replies:
Posted By: lspker
Date Posted: July 21, 2014 at 9:09 PM
try highschool electronics club
Posted By: burntkat
Date Posted: August 05, 2014 at 12:17 PM
Hell, send me a detailed spec on it. I could use some side work. ;)
Quite serious.
-------------
"Always listen to experts. They'll tell you what can't be done, and why. Then do it. - Robert A. Heinlein"
|