best way of making wiring connections
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138005
Printed Date: April 18, 2024 at 10:36 AM
Topic: best way of making wiring connections
Posted By: cabodreaming
Subject: best way of making wiring connections
Date Posted: December 20, 2014 at 12:08 PM
I am looking at installing a car starter in my Infinity and was wondering if there is a best way of making connections. The quick connectors are appealing from the ease of use view-point but I have always felt that they were a temporary solution that would bit you in the end. Your comments/experience would be appreciated
-------------
Dreaming
Replies:
Posted By: KPierson
Date Posted: December 20, 2014 at 10:50 PM
Soldering is the way to go if you want to make a connection that will last longer then the car.
Quick connectors have proven to be unreliable over time.
Solder the wires together and then wrap with a high quality electrical tape (Scotch 33+).
And I'm pretty certain you have an Infiniti!
-------------
Kevin Pierson
Posted By: howie ll
Date Posted: December 21, 2014 at 11:14 AM
Please see at least the two threads above before posting, they go to great lengths explaining the advantages of soldering, it's called doing your research.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: shark mobile
Date Posted: December 23, 2014 at 10:12 PM
Soldering is the only method to use...quick connects are useless and problamatic...at my shop you won't find a single quick connect...solder and tightly tape like Kpierson said :).
-------------
Solder, tape, repeat!
|