Minifuse Tap Confusion

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144140
Printed Date: April 26, 2024 at 10:23 PM

Topic: Minifuse Tap Confusion

Posted By: pokesmot
Subject: Minifuse Tap Confusion
Date Posted: February 08, 2018 at 12:06 PM

Purchased a USB hardwire kit on amazon. It comes with a mini fuse tap with a 10A fuse molded into the connector.
However.. 1 side of this fuse must connect to the device meaning the other side of the fuse needs to be connected to power. If installed backwards the fuse will not protect the hardwire kit.
Am I looking at this the right way?

Anybody encounter this, and can you provide some clarity?

posted_image

Replies:

Posted By: mgoetz74
Date Posted: February 08, 2018 at 5:20 PM

just use a multi meter, pull the fuse out and see which side has power and which one doesn't. Put the wire side on the the side that doesn't so if you pop the fuse it protects the item on the other side

-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

Print Page | Close Window