Looking To Buy Unknown Connectors. ID

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144604
Printed Date: May 02, 2025 at 9:30 AM

Topic: Looking To Buy Unknown Connectors. ID

Posted By: jamesavery22
Subject: Looking To Buy Unknown Connectors. ID
Date Posted: July 18, 2018 at 8:06 AM

I have a cheap chinese electrical motor controller that uses these connectors and I'm looking to buy these three connectors. Any chance anyone has ever seen them before? Whether virgin or already on a harness, I'd like to buy them so I can use them on something else.

posted_image

Replies:

Posted By: Ween
Date Posted: July 18, 2018 at 9:14 PM

Hi,
Some dimensions might help. How wide are the female and male tabs? Are they .250" -- 6.3mm? or wider? On the 2 terminal housings, what is the pitch (distance between the terminals).
Also the overall dimensions of the housings for the female terminals. What dimensions would a housing need to be to fit the male tabbed connector.
More info would help.

Posted By: jamesavery22
Date Posted: July 19, 2018 at 7:22 AM

Ween] wrote:

Hi,
Some dimensions might help. How wide are the female and male tabs? Are they .250" -- 6.3mm? or wider? On the 2 terminal housings, what is the pitch (distance between the terminals).
Also the overall dimensions of the housings for the female terminals. What dimensions would a housing need to be to fit the male tabbed connector.
More info would help.

Thanks. Will measure and post back.

Posted By: iskidoo
Date Posted: July 19, 2018 at 4:52 PM

These are similar but not exact but would give you both sides of the connection. If the link doesn’t work it’s on Amazon under “Lsgoodcare 6.3mm connector kit”.
Use the drop down selector to choose either 2 or 3 pin connectors.
https://www.amazon.com/dp/B06Y2BJD5B/ref=cm_sw_r_cp_api_BCquBbA30WAX8

-------------
Steve G

Print Page | Close Window