subwoofer set up

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14475
Printed Date: August 28, 2025 at 10:02 PM

Topic: subwoofer set up

Posted By: freak
Subject: subwoofer set up
Date Posted: June 04, 2003 at 7:49 PM

if the two subs are wired in parallel and i bridge in series my conn.should stay at 2ohm correct

Replies:

Posted By: MAXST
Date Posted: June 06, 2003 at 2:58 PM

Whats your subs ohm? if you have two 4 ohm subs, and bridge it,and run in parallel , you get a 2 ohm load. two 2 ohm = 1 ohm.

-------------
I need quality equipment, feel free to donate.

Posted By: freak
Date Posted: June 06, 2003 at 8:19 PM

the subs are dvc wired in parallel want to reverse feed by bridging in series with out droping to one ohm

Posted By: MAXST
Date Posted: June 06, 2003 at 8:30 PM

What ohm are the voice coils?

-------------
I need quality equipment, feel free to donate.

Posted By: freak
Date Posted: June 06, 2003 at 8:45 PM

they are dual 4

Posted By: MAXST
Date Posted: June 06, 2003 at 8:55 PM

Speaker Polarity
Positive (+)	Negative (-)
red post	black post
purple dot - 4 ohm	no dot
red dot - 8 ohm	no dot

This should be right.

-------------
I need quality equipment, feel free to donate.

Posted By: freak
Date Posted: June 06, 2003 at 9:14 PM

close reverse amp feed put speakers in par.

Print Page | Close Window