Multimeter Issue
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145739
Printed Date: May 02, 2025 at 11:27 AM
Topic: Multimeter Issue
Posted By: lesterl
Subject: Multimeter Issue
Date Posted: November 01, 2019 at 9:04 AM
I suspect I already know the answer to my question, but will ask anyway.
Northern Tools Multimeter - Days short of 1 year old. Yes - Made in China.
Worked fine until this A.M. When I turn it on, I immediately receive a readout of 1666. Sometimes one of the digits will change. No flickering of the digits. This numeric reading remains on the screen as I switch from the various voltage/ohm/amp settings. Have replaced the battery(9V) with 2 new ones - both checked out with another meter. Same result. Turn on the meter and I receive a display of 1666. Pulled fuse - checked with continuity function using another meter - OK.
Contacted Northern Tools tech line. Person I spoke with had no clue.
Again - I think she's dead. Thanks for your time.
Replies:
Posted By: lesterl
Date Posted: November 01, 2019 at 10:00 AM
Update - I apologize for wasting your time.
The multimeter in question has a Hold Button. I did depressed it earlier, but tried again a short while ago and now the screen has cleared up. The VOM is is functioning as expected.
|