Print Page | Close Window

Dividing a Vehicle Speed Signal

Printed From:
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
Printed Date: August 18, 2022 at 6:35 AM

Topic: Dividing a Vehicle Speed Signal

Posted By: ultm8z
Subject: Dividing a Vehicle Speed Signal
Date Posted: April 12, 2020 at 12:36 PM

Long story... but here's what I'm trying to do..

My VSS is a sine wave output.   I'm trying to split the VSS high-side signal to run both the ECM (which requires a sine wave) and an Autometer speedometer.

When I tap the Autometer speedometer into the VSS high side, the speedometer works great. But the ECM reads zero at any speed.   Almost seems like the speedometer is "hogging" the signal.


The speedometer can output a 0-5V square wave signal, but the ECM can't use it.

Print Page | Close Window