DEI 529T Window Module
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1463
Printed Date: July 26, 2025 at 7:32 AM
Topic: DEI 529T Window Module
Posted By: rg1998
Subject: DEI 529T Window Module
Date Posted: June 24, 2002 at 11:40 AM
I had this installed on my last car and now I want to put it in my new car. The problem is I don't have the installation guide for it and the info on the back of the module is not helping me. I know where all the power window wires are, I just can't figure it out. By the way, I have a 98 Integra.
Replies:
Posted By: GlassWolf
Date Posted: June 24, 2002 at 11:47 PM
Usually, it's like this:
+12V (red?) to battery
"accessory" (pink?) to accessory/ignition (to disable module while keys are in the ignition)
500ma Activation )orange?) to negative output when armed wire of the alarm BCM
WHITE/ GREEN/ BROWN / blue wires go to right and left window motor and switch, as labeled on the back of the module. you need to wire these into the circuit in *series*, by cutting the wires on the harness in the car, and putting the module "between" the two cut ends.
that should do it.
-------------
-GlassWolf
Pioneer Stage-4, Orion, DynAudio, Fi
|