2006 Dodge Ram 3500, Starter Relay Buzzing During Remote Start

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=148439
Printed Date: November 21, 2025 at 10:57 PM

Topic: 2006 Dodge Ram 3500, Starter Relay Buzzing During Remote Start

Posted By: cooter347
Subject: 2006 Dodge Ram 3500, Starter Relay Buzzing During Remote Start
Date Posted: November 21, 2025 at 8:38 AM

Hello, Im trying to install a Viper 4115V remote starter with an iDatalink ADS-ALCA into a 2006 Dodge Ram 3500 5.7 Hemi. I wired everything up according to the wiring diagram for the ADS-ALCA. When i remote start it, the ignition comes on and all i get is a buzzing sound coming from the TIPM, which im assuming is the starter relay. Also, whats weird is if i install the diode in the ignition wire like they want, i dont get any ignition power. If i leave the diode out, i get ignition power.

Replies:

Posted By: cooter347
Date Posted: November 21, 2025 at 8:50 AM

This is the wiring diagram i used. I am using 2 way data mode.

Print Page | Close Window