Print Page | Close Window

switches - need help!

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15593
Printed Date: May 28, 2024 at 9:55 PM


Topic: switches - need help!

Posted By: FRITO
Subject: switches - need help!
Date Posted: June 28, 2003 at 5:53 PM

i want to switch out my srock switch panbel with some better looking buttons. since im making custom fiberglassed door panels. what type of seitches would be best? also how would i wire the factory to new switches???

https://images.cardomain.com/member_img_a/217000-217999/217862_85_full.jpg

https://images.cardomain.com/member_img_a/217000-217999/217862_86_full.jpg

THANKS!!




Replies:

Posted By: demeanor
Date Posted: July 01, 2003 at 11:49 AM
https://www.google.com/search?hl=en&ie=UTF-8&oe=UTF-8&q=electric%2Felectronic+switches

https://www.switches-ez.com/switches/0025477_0025477_1.html

go there and see if you fancy any of them. the module might give you a bit of a headache, more than likely you have the driver window be selectable (primary push-the window moves down a bit, full push-the window moves all the way up/dn) so the wires are accordingly. that might be the only problem, but that's not to say it's imposible.

hope that helped


-------------
It's better to ask a "STUPID" question...than to know a "STUPID" answer. :-)


Print Page | Close Window