pushstart ignition?

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16002
Printed Date: May 29, 2024 at 2:34 AM

Topic: pushstart ignition?

Posted By: mrsparkle
Subject: pushstart ignition?
Date Posted: July 07, 2003 at 3:26 PM

Hi,

Just wondering if there's a way to rig up a push start ignition on a 99 Chevy Cavalier?

Replies:

Posted By: xetmes
Date Posted: July 07, 2003 at 4:04 PM

yes, yes there is always a way. posted_image

Posted By: MAXST
Date Posted: July 07, 2003 at 4:40 PM

ya..get a catalog like jegs and go to the race car section...there you can buy the switchs and stuff to do it...looks hard tho..

-------------
I need quality equipment, feel free to donate.

Posted By: fakepete
Date Posted: July 07, 2003 at 8:55 PM

All you need to do is add normally open pushbutton to the start wire on the key switch. Or if you wanted to disable the key start completly just cut the wire to the key switch and wire it directly to the pushbutton. I don't see why people want to use relays and 60A toggle switches all the time. All you need is a pushbutton.

Posted By: Big Purds
Date Posted: July 08, 2003 at 1:15 AM

I have a setup designed for a much older car, but I am sure it would be fairly easy to make work in a newer car as well...I use my alarm to activate the "accessory" position of the key via a relay...if you want a copy of this diagram I may be able to scan it for you...

let me know...

Print Page | Close Window