Custom Fuse Panel w/LED’s?
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16802
Printed Date: August 28, 2025 at 1:00 AM
Topic: Custom Fuse Panel w/LED’s?
Posted By: Scottiee25
Subject: Custom Fuse Panel w/LED’s?
Date Posted: July 28, 2003 at 8:07 PM
I am needing some help with a project I am working on. I am building a fuse panel in my center console for all of my accessories that I am adding to my car. What I am needing help with is installing the LED's in there as well. I am wanting them to turn on when the accessories are turned on so I know the fuse is good. The LED's that I have look like LED's for car alarms. The positive wire has a red wire and the negative wire has a blue wire. Can anyone please tell me how to install these so they will work with what I need them to. I know I need to put a resistor on them but what i need to know is do I hook the red wire up to my power wire for the accessories and the blue wire to a ground or how will I do this. Any help would greatly be appreciated. If anyone wants to look at what I am doing check my website and see. https://www.cardomain.com/id/kitt350
Replies:
Posted By: xetmes
Date Posted: July 29, 2003 at 11:25 AM
Just hook the LEDs up to the side of the fuse that has no power when the fuse is removed.
Posted By: auex
Date Posted: July 29, 2003 at 4:44 PM
Need to know if they are twelve volt led or two volt led?
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|