Help wiring RCA cables to amp

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1702
Printed Date: May 09, 2025 at 8:04 AM

Topic: Help wiring RCA cables to amp

Posted By: TB2Stang
Subject: Help wiring RCA cables to amp
Date Posted: July 04, 2002 at 1:42 PM

I am trying to wire an amp to my Mach 460 sound system in my mustang and I have everything done except the RCA wires. The Mach 460 does not have the hookups for the RCA wires they just run straight to the other three factory amps that come with the Mach 460. My question is which wires would I connect a line output convertor to what color and where are they located. Any info on the subject would be most appreciated.

Replies:

Posted By: Velocity Motors
Date Posted: July 04, 2002 at 2:49 PM

Just tap into the rear speaker leads of the system for the line level converter.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: GlassWolf
Date Posted: July 04, 2002 at 5:29 PM

what he said *grin*
be sure the pair of speaker leads into which you splice, are ones that usually have full gain.. (when you use the fader you want this set to get an unattenuated signal, or else you'll cut power/signal level down to your new amp as well as those rear speakers)

-------------
-GlassWolf
Pioneer Stage-4, Orion, DynAudio, Fi

Print Page | Close Window