1988 camaro

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17258
Printed Date: July 12, 2025 at 5:30 PM

Topic: 1988 camaro

Posted By: bigt_45
Subject: 1988 camaro
Date Posted: August 06, 2003 at 10:07 PM

i know this doesnt directly have anything to do with electronics, but i was wondering if i could put a chevy 350 engine into my camaro. i have a chevy 305 fuel injected. someone told me i could as long as is was "center bolt", where the heads have bolts down the middle and not on the sides. can anyone tell me for sure

Replies:

Posted By: skahide
Date Posted: August 12, 2003 at 10:44 PM

Go to www.thirdgen.org youll find everything youve ever wanted to know about third generation camaro's and firebirds. there is a motor swap section and just do a search. with all the info there youll be able to do it yourself.. good luck,

skahide

Posted By: e40water
Date Posted: August 14, 2003 at 3:02 PM

Hey man a reply to youre 88 camaro question. Yes a 350 / 305 small blocks are the same, it should bolt up wit no troubles, Ive put 350 small block in a 80 camaro that was stock with 3.8 V6 I just had to change the motor mounts.

good luck!

-------------
e4

Posted By: Nocturnal
Date Posted: August 27, 2003 at 10:45 PM

Did the same thing as e40water in my 88 camaro some time ago. The motor mounts are the only issue. Should be cake.

Good luck.

Print Page | Close Window