Pin-out for '93 Nissan Maxima?

See if this is the same as what you had: https://www.velocitymotorsport.com/Nissan_OEM_Stereo_plug.gif

Hi justing50, do you need the pin configuration for the factory radio, and if so, is it a Bose system or not? Or do you need the wire colors for the vehicle?

If you need the wire colors, you can view them here:
https://www.the12volt.com/installbay/stereodetail/1628.html

If you need a different harness, Metra makes harnesses for most OEM radios and if you purchased the harness locally, you should be able to exchange it for the correct harness. If the unit isn't mounted in the vehicle, bring it with you when you exchange or purchase a new harness. However it turns out, let us know about the radio and if you need anything else.

the12volt

Hey Guys,

I appreciate the quick reply.  I'm trying to find which wire color goes to what.  The radio is the standard AM/FM/Casette on the car.  Trying to put in a new Pioneer DEH-1350.  Some of the wire colors you sent I have, some I don't.  I've attached a crude drawing of the car harness below (which is actually two separate plugs), looking at it from the pin side.

1993 Nissan Maxima--AM/FM/Casette Vehicle Wiring

-------------                        -------
|1|2|3| |4|*|                       |1|2|3|
|5|6|7| |8|9|                      |4|5|6|
-------------                        -------
      | |                                   | |

1-BLACK/ White      1-Thick Black (Ground?)
2-BLACK/ Red         2-Yellow
3-GREEN/ YELLOW   3-Green
4-BLACK/ Red         4-BROWN / Black
5-Blue                   5-Blue
6-Brown                6-Orange
7-BROWN / White
8-RED / Yellow
9-YELLOW /GREEN
*-Empty

I'm trying to surprise the wife with a new radio, but this thing is getting the best of me so far.  Again, all your help is greatly appreciated.  Thanks!