Help on power windows wiring

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18910
Printed Date: May 15, 2025 at 2:25 PM

Topic: Help on power windows wiring

Posted By: blue_16v
Subject: Help on power windows wiring
Date Posted: September 15, 2003 at 8:17 PM

posted_image

this is my power window switch....

(4=power for light [ + ] input) (1=ground for light [ - ] ) (3=power for switch [ + ] input)

(5= up output [ + ] output) (2= down output [ + ] output)

how do i wire this switch up to my window motor since my window motor only has 2 leads a [ + ] and a [ - ] i know i need relays because the up and down are both positive [ + ] help!!!!

Replies:

Posted By: themagicone
Date Posted: September 15, 2003 at 8:41 PM

Well basically a window works by going one direction when + is on one lead and - on the other, switch those around and it goes the other way.

5 -------- Motor(wire 1)
I
I----------86 on a relay, 85 and 87 to ground, 30 to Motor, wire 2

2 -------- Moto(wire 2)
I
I---------86 on a relay, 85 and 87 to ground, 30 to motor, wire 1

You might have to switch 5 and 2 depending on which way the motor goes.

Posted By: blue_16v
Date Posted: September 15, 2003 at 9:36 PM

It just makes clicking noises????help...mabe my relays are burnt out.....no voltage.....help.....!!!!!

Posted By: blue_16v
Date Posted: September 16, 2003 at 2:30 AM

Help?....any one have any other suggestions or comments .....

cause Istill cant figure it out ...thanx

or does any one know where I get my hands on a power window control unit???....for two windows and three switches...??? possibly even a ONE TOUCH up / down unit?

Print Page | Close Window