Installing TV & DVD

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18931
Printed Date: May 16, 2025 at 12:31 AM

Topic: Installing TV & DVD

Posted By: Scottm69s
Subject: Installing TV & DVD
Date Posted: September 17, 2003 at 5:11 AM

I am about to install a TV and DVD player in my truck, I was wondering where I should run both power wires to, the battery or fuse box?

Replies:

Posted By: Velocity Motors
Date Posted: September 17, 2003 at 8:30 AM

Run it to the fuse box but make sure that your RCA wires are not run down the same side of the truck. Even if they are small gauge wires, the RCA's will still pick up interference from the power wires.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Scottm69s
Date Posted: September 17, 2003 at 7:17 PM

Do you happen to know which slot in the fuse box I need to run the power to?

Posted By: Velocity Motors
Date Posted: September 18, 2003 at 12:53 AM

Use a DMM or a light tester to see which fuses are IGN and which are constant.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Deez_Nutz
Date Posted: October 07, 2003 at 11:51 PM

you can go to autozone and get a 3 fuse block that you can hook up to your batt or what not and it adds 3 more fuese they are a lot of help and only 4 bucks good deal i got one in my ride its hooked to my hu and tv to see the setup in progress

https://members.cardomain.com/kwickymart

Print Page | Close Window