FM Modulator Install

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1906
Printed Date: May 14, 2024 at 7:41 AM

Topic: FM Modulator Install

Posted By: dufferz
Subject: FM Modulator Install
Date Posted: July 13, 2002 at 12:40 AM

Sorry if this seems like a dumb question but I am new to installing stuff in my car. I recently purchased an FM Modulator to install in my car. The Modulator has a red + and black - wires that the diagram shows connect to the car battery. What is the easiest way to connect these wires?

Thanks for any help,

Duff

Replies:

Posted By: mobiletoys2002
Date Posted: July 13, 2002 at 12:46 AM

your ground will go to a chassis piece of metal as for your 12 volt constant you can tap into your radios 12 volt feed, or you can run a wire to your ignition switches 12 volt feed dont just tap into the fuse panel to avoid induced noise in your system.

Posted By: dufferz
Date Posted: July 13, 2002 at 3:03 PM

Thank mobiletoys I thought it was something like that. Next project is to make a switch for the modulator because it interferes with some fm stations posted_image

Print Page | Close Window