Ignition switch
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19366
Printed Date: May 21, 2024 at 3:45 PM
Topic: Ignition switch
Posted By: ashex
Subject: Ignition switch
Date Posted: September 27, 2003 at 12:41 PM
I'm not entirely positive if this should be here or car radio but the majority of my quesiton should be here.
my radio requires a ACC wire to turn on, which for newer models is conected to the ignition switch, so what I have been doing is adding a wire, going directly from the battery to the radio except it will have a switch in between along with a fuse. I found a wire with a built-in fuse box but there is no fuse, what would be the recommended size for a fuse to put in?
Replies:
Posted By: Velocity Motors
Date Posted: September 27, 2003 at 12:47 PM
a 10 amp fuse will be suffiecient for any radio.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|