Print Page | Close Window

Amps and Ohms Oh My!

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1965
Printed Date: July 16, 2025 at 6:30 AM


Topic: Amps and Ohms Oh My!

Posted By: Livin4Real
Subject: Amps and Ohms Oh My!
Date Posted: July 15, 2002 at 6:00 PM

Just wanted to clarify something.  I have a 4 ohm Soundstream SPL 10"  with
DVC's. I have it wired in parallel, so I'm now looking at 2 ohms out correct?
If I bridge it I'm now looking at 1 ohm right? Just wanted to confirm this.
Thanks, Brian



Replies:

Posted By: GlassWolf
Date Posted: July 16, 2002 at 2:22 PM
yes sir what you've stated is correct.
if you have a pair of those tens though you can run 2-ohms stereo :)
or, run one output channel of the amplifier to each coil, and have 4-ohms stereo from the amp into one sub.



-------------
-GlassWolf
Pioneer Stage-4, Orion, DynAudio, Fi


Print Page | Close Window