Help, I dented my sub

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20598
Printed Date: August 15, 2025 at 12:25 AM

Topic: Help, I dented my sub

Posted By: battsup
Subject: Help, I dented my sub
Date Posted: October 26, 2003 at 3:03 PM

I accidently dropped one of my subs on the other. The only damage is that the bubble on the dust cap got dented. How do i undent it?

Replies:

Posted By: MAXST
Date Posted: October 26, 2003 at 5:17 PM

vaccum will work...just cut the suction so its not pullin alot of air.

-------------
I need quality equipment, feel free to donate.

Posted By: battsup
Date Posted: October 26, 2003 at 7:33 PM

MAXST] wrote:

accum will work...just cut the suction so its not pullin alot of air.

Exactly what do u mean by that? do u mean that by decresing the suction that it will come out easier? or the other way around. I tryed using the vacuum(actually 2 different ones) and i can get it to get a good grip but then when i go to pull the vaccum and sub let go of each other.

Posted By: MAXST
Date Posted: October 27, 2003 at 6:40 PM

crimp the hose so it does pull as much. once you pull it out some you could the vaccum off....

or some sticky tape might work.

-------------
I need quality equipment, feel free to donate.

Posted By: lspker
Date Posted: December 08, 2003 at 9:13 PM

If the sub is vented at the back, you can remove any screens and GENTLY push the dust cap back out with a long qtip or pencil with an eraser on it. Gently.

Print Page | Close Window