Looking for any help. Have a 99 dodge ram with infinity system which also has the steering wheel volume controls. There are 3 harnesses plugging into the back of the OEM radio. Only see harness retrofit kits with two plugs. Have purchased and installed 2 plug harness kit(correctly) but cannot get sound to any speaker. Do I need to jumper this 3rd plug 2 wire harness (into the existing 2 plugs and if so help) please. Any response is appreciated in advance. Thanks Jerry.
-------------
jerryrob
The two wire plug ( white molex ) is the steering wheel control plug for the OEM player. You will need to also hook up the grounding strap to a ground to complete the circuit in order for the system to work. Try this and post your results.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Thanks much for the reply back, Have quad checked all connections (including separate ground). Must have a bad new unit. (kenwood kdc-x817). Have hit reset button, have turned on speakers via system q settings to oem, checked fader, and balance, volume to 50% and gone through all troubleshooting guidelines in back of manual. All functions appear to work but cannot get sound out to any of oem speakers. Thanks again for your response.
-------------
jerryrob
DUDE HOOK UP THE BLUE TRIGGER WIRE ! IF YOU DID THERE SHOULD BE A BLACK W/ A GREEN THAT WAS HOOKED TO THE GROUND STRAP IT MUST BE GROUNDED AS WELL FOR THE INF AMP TO TURN ON
-------------
4 guys 1 shop & we know r sh*t