Trofeo Auto dim mirror wiring

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23848
Printed Date: May 01, 2025 at 6:48 AM

Topic: Trofeo Auto dim mirror wiring

Posted By: Jimz90indy
Subject: Trofeo Auto dim mirror wiring
Date Posted: January 03, 2004 at 3:06 PM

Ok, I just aquired an Oldsmobile Trofeo auto dim rear view mirror. It has three wires, black (ground obvioulsy) pink w/black stripe and green w/black stripe. Can someone identify for me which wire is primmary power and which is aux? I might even be wrong with that statement, but I sure could use the help. Thanks! Jim

-------------
James Card

Replies:

Posted By: hotrodelectric
Date Posted: January 03, 2004 at 10:27 PM

If I remember this right- the pk/bk is ignition, the gn/bk is reverse lamps input.

Posted By: Lurkin
Date Posted: January 03, 2004 at 10:45 PM

and black dont have to be ground..factory stuff can throw curve balls to you.

Posted By: Jimz90indy
Date Posted: January 03, 2004 at 11:39 PM

hotrodelectric wrote:

If I remember this right- the pk/bk is ignition, the gn/bk is reverse lamps input.

Thanks HotRod, you are correct! I happened to bump into a friend on AIM and he said the exact same thing. Thanks again. Jim

-------------
James Card

Posted By: hotrodelectric
Date Posted: January 04, 2004 at 12:40 AM

True enough, Lurkin. Ground code on my Peugeot is gn/ye!!
Usually though, on GM products it's bk or bk/wh. OTOH, there is a tan ecm ground on the earlier TPI systems... posted_image

Jim, I just PM'd you- contacting me is no problem.
>Thanks again.
You're welcome.

Print Page | Close Window