REMOTE

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2418
Printed Date: July 18, 2025 at 9:42 PM

Topic: REMOTE

Posted By: skifriek15
Subject: REMOTE
Date Posted: August 01, 2002 at 2:46 PM

I have a remote starter, and I was wondering if it would be possible to wire my interior neons to the remote so that I could turn them on when I press the accessory button. Does anyone know how to wire this?

-------------
Justin Karimi

Replies:

Posted By: sparkyssb
Date Posted: August 01, 2002 at 5:09 PM

(Need to know what type of remote start you have) Does your remote start have an accessory out signal? is it negative or positive? if so, you need to find out if it is pulse or constant....then we can figure out a relay schematic and set ya up! posted_image

Posted By: Velocity Motors
Date Posted: August 02, 2002 at 8:30 AM

Just to verify what you want.... did you want the neon to turn on when you remote start and then turn off when you get intot he car and put the key in the ignition ? If you want this then hook up the GROUND OUT WHEN RUNNING wire to the (-) of the neon and apply 12 volts to the other wire.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window