how do you charge a dei powercap 1 farad?

i was wanting to know how to charge a dei powercap 1 farad i lost the little bulb that you use to charge it what else can i use?

thanks

You should be able to use any low value resistor (somewhere from 100 to 1000 Ohms) but make sure if you use a 100 ohm resistor it is capable of handling at least 1/2 watts of power. (ceramic types are preferable in this case because it will get quite hot). You can use a higher resistance if you want but remember the higher the resistance, the longer it will take to fully charge the capacitor. You need to charge your capacitor with a resistor because without it, the fast inflow of current can damage it. Hope

You should be able to use any low value resistor (somewhere from 100 to 1000 Ohms) but make sure if you use a 100 ohm resistor it is capable of handling at least 1/2 watts of power. (ceramic types are preferable in this case because it will get quite hot). You can use a higher resistance if you want but remember the higher the resistance, the longer it will take to fully charge the capacitor. You need to charge your capacitor with a resistor because without it, the fast inflow of current can damage it. Hope this