air space
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26051
Printed Date: May 01, 2024 at 8:21 PM
Topic: air space
Posted By: n2sound
Subject: air space
Date Posted: February 08, 2004 at 11:23 AM
does anyone know the air space for hollywood 15 in subs model 21560d thanks for the help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
------------- N2SOUND
Replies:
Posted By: mobiletoys2002
Date Posted: February 08, 2004 at 11:37 AM
try the website! sesarch online for hollywood i have never even heard of these subs.
Posted By: n2sound
Date Posted: February 09, 2004 at 6:51 AM
Hey mobiletoys2002 , I sorry you have never heard of hollywood sound labs --- they have been making speakers since the early 80's they made them for rockford fosgate , sound stream , and many other so call top names , before they all swaped ownership ... I have been installing for 20+ years and yes i went to there web site I 'm not a dumb a** the subs I'm speakin of are the excusion series subs the model # is 21560d i would run these on my box program but i don't have the small thee peimeters i was wonder if anyone had used them and what kind of enclosure they used for them I posted simple question hoping for a simple anwser Yes i have owned a couple stores not worth the hassle I guess i will call there tech line direct . good luck in your adventures n2sound ------------- N2SOUND
Posted By: beyondamfm
Date Posted: February 09, 2004 at 1:48 PM
Can we all just get along. ------------- The Clear Bra Guy
KCs premiere paint protection guru
Posted By: n2sound
Date Posted: February 09, 2004 at 4:41 PM
yes we can get along ..... but treat people with respect ......... i been using fiberglass/hydro's/air shocks for 15 years any way thought this sight was for help not just a chat box
------------- N2SOUND
Posted By: HeathMac
Date Posted: February 10, 2004 at 1:03 AM
why is that guy such a know it all for anyway ?
Posted By: Clean Install
Date Posted: February 10, 2004 at 1:19 AM
LOL I was just reading this post and thought the same thing ???????????? ------------- If we learn from each success and
each failure, then we can improve ourselves
Posted By: n2sound
Date Posted: February 10, 2004 at 5:09 AM
I don't consider myself a know it all as you say but , I have been in it for along time .... been there and done that if you know what i mean ..... i have built every kind of system there is from 22 watt cheater system that was in the mid 140's ( late 80's ) to 150,000 watt system using batteries as the rail voltage in the amplifer .. those of you thats been around remember the bread truck in daytona with 24 stroker 15" subs thats it -- well I helped build that so yea i guess do know alot and for ya'll info the tech dept is closed at hollywood sound labs this week .. have a customer that wanted a box without the specs you can't built the proper enclosure ... didn't mean to piss anyone off but i guess i did sorry just needed some specs to build an enclosure by ------------- N2SOUND
Posted By: DYohn
Date Posted: April 13, 2004 at 11:32 AM
Volume displacement is calculated by multiplying Cone Area (Sd) times maximum excursion (Xmax). Total displacement including the basket and magnet structure varies depending on the loudspeaker and must be obtainedfrom the manufacturer, or measured using a volume displacement technique like filling a box with sand, placing the loudspeker into the box and measureing the volume of sand removed to clear the loudspeaker assembly. ------------- Support the12volt.com
Posted By: DYohn
Date Posted: April 13, 2004 at 11:51 AM
Posted By: n2sound
Date Posted: April 13, 2004 at 1:14 PM
gee thanks for the science lesson , but i know how to figure air space but without the small/thiee priemeters , its impossile to build the correct enclosure , I have been around car audio 20+ years I thought this site was to help each other .. but i guess i was wrong ... it is for the novice to shoot there mouths off about things they know nothing about ... i'm not saying there's not some quality installers here but the ones i have been in contact with shouldn't be here at all .... good luck to all hope i can help in the future
------------- N2SOUND
Posted By: Paradigm
Date Posted: April 13, 2004 at 3:43 PM
No need to jump anyone's case, n2sound. You asked a question, someone gave you an answer they thought would help. Lots of people come here asking a question for an answer they could've found had they simply gone to the manufacturer's web site. That's all mobiletoys was doing - trying to lend a hand, and you get all uppity on him and everyone else. Your initial post made no mention of your qualifications or whether you had tried the website or not. So cut people some slack, and they'll do the same for you. ------------- VEHICLE: 2002 GMC Sonoma ZR2
Alpine CDA-7940
AudioControl EQT x2
JL Audio 1000/1
JL Audio 10W6 (originals) x3
Kicker ZR120
Kicker ZR460
Polk GXR-6 x4
Polk GXR-4 x2
Posted By: DYohn
Date Posted: April 13, 2004 at 3:58 PM
Cool your jets, n2sound. I don't know what your problem is, but please don't come on here and bash people who are trying to help you. ------------- Support the12volt.com
|