convert non-pwr window to pwr window
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26317
Printed Date: August 21, 2025 at 8:25 PM
Topic: convert non-pwr window to pwr window
Posted By: profuse007
Subject: convert non-pwr window to pwr window
Date Posted: February 11, 2004 at 11:19 PM
i want to convert non-pwr window to pwr window for 01 accord 4drs. i have manual windows right now and im planning to convert to power windows. i want to go w/ the stock window regulator/motor. what are my options?
1. spal kit that work w/ the manual windows right now.
2. junk yard, prolly 50-70bucks a pop
3.***will this work if i just add the motor to the regulator to turn it into powered.
btw imma get some factory panels and rig up the whole wiring ......or check out haynes for schematic?
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Replies:
Posted By: S.I.Autosports
Date Posted: February 12, 2004 at 5:31 AM
It would cheaper to go with the after-market kit, but the factory would look cleaner. After-market would probably be easier to wire too. If you find a junk yard with the regulators you could see if they have the factory body loom and switch yours out. Its alot of work though.
Posted By: profuse007
Date Posted: February 12, 2004 at 8:06 AM
thanks for the advice
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
|