bypassing stock '99 ford zx2 alarm

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2710
Printed Date: May 16, 2024 at 10:19 PM

Topic: bypassing stock '99 ford zx2 alarm

Posted By: pobudz
Subject: bypassing stock '99 ford zx2 alarm
Date Posted: August 12, 2002 at 8:46 AM

Anyone know the best way of bypassing it, and where it is located?

I was thinking just cut off the device and use the existing wires... but if i could do this, wheres the device in the first place...

Any help is appreciated

-------------
1998 Dodge Stratus ES
Mods: Clear corners, blue LED washers, (2) 10" MTX Thunder4000s, 600W (150x4) Audiologic amp, Kenwood KDC-2019V 200W Headunit

Replies:

Posted By: DeathsJester12V
Date Posted: August 15, 2002 at 8:24 PM

To my knowledge, there is no way to bypass it, or cut it.....I think ford started to copy GM and built the alarm into the computer, so....SOL on that part...

If you're putting in an aftermarket alarm, you need to integrate the two.....atleast that's what I always do....

-------------
Đễẳ†ђş 12\/ Ĵęśŧē®™

Print Page | Close Window