Hey everyone-
I hope there is someone out there that can help me ...
I recently purchased a 1990 Camry - unfortunately the power windows on the drivers side are not functioning. The only window that was functioning when I purchased the car was the right rear (only from the switch on that door - not via the master switch) I did some troubleshooting and decided to remove the master switch, open it and clean all of the contacts ... I replaced the cleaned master switch and the front right window is now also working - but again, only from the switch on that door not from the master switch ... Any ideas on how to get the remaining two windows to function!? I would be very grateful to anyone who could offer any suggestions - it's hot in Boston in August (The car needs an R12 shot too!)
THANKS!!!
Eric
eric.klein5@verizon.net
Clean the other contact on the other windows aswell. If this does not work.... your PWC module may be damaged and needs replacing. If you have a DMM you can test wether or not there is power going to the wires from the master switch.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA