New wire to door, how?

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28864
Printed Date: July 07, 2025 at 11:03 AM

Topic: New wire to door, how?

Posted By: joeykunz
Subject: New wire to door, how?
Date Posted: March 22, 2004 at 7:55 PM

Ok, I'm installing some jl 6x9's in my door. I'm trying to run new speaker wire to them from the amp, problem is the end of the gooseneck to the door I can't even see. I have a 2003 dodge ram, has anyone done this on the new rams? The end of the gooseneck seems to end way back in the dash behind metal, I dont know how to get to it. I need help guys..

Thanks David

Replies:

Posted By: MAXST
Date Posted: March 23, 2004 at 9:34 PM

Try some length of wire or fishtape?

-------------
I need quality equipment, feel free to donate.

Posted By: achow
Date Posted: March 23, 2004 at 9:42 PM

i have an old beat up antenna from previous install i use....a coat hanger will work also...anything that is stiff enought to fish its way through that rubbery part should work....

-alfred

Posted By: joeykunz
Date Posted: March 23, 2004 at 10:24 PM

ok thanks

Print Page | Close Window