4 ohm DVC MA DXI

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28958
Printed Date: May 12, 2025 at 11:55 PM

Topic: 4 ohm DVC MA DXI

Posted By: oakleyne22
Subject: 4 ohm DVC MA DXI
Date Posted: March 24, 2004 at 10:00 AM

I am planning to hookup one 12in. MA Audio DXI. It is 600 watts max and I plan to put it in a sealed box(is this the best for deep bass?). does anyone know the best dimensions and wiring for this small starter project. Also any suggestions on a good resonable priced amp would be great.

Replies:

Posted By: Clean Install
Date Posted: March 26, 2004 at 9:25 PM

well post back with the rms rating of the sub....

that will help us out more

also the sub manual should have a recomended sealed enclosure size...also let us know what size in cubic feet it is... thanks

-------------
If we learn from each success and
each failure, then we can improve ourselves

Posted By: Ravendarat
Date Posted: March 26, 2004 at 10:12 PM

generally a ported box will play deeper but the sealed box gives you a tighter response. If you want deep go ported.

Posted By: oakleyne22
Date Posted: March 29, 2004 at 9:31 AM

It is a dual voice coil 600 max 300 rms. I am thinking of putting a alpine 350 on it for now(good or bad)

Thanks for the help

Posted By: Clean Install
Date Posted: March 31, 2004 at 2:08 AM

....just make sure that the amp you get is 2ohm stable....the alpine will work just fine for you....

-------------
If we learn from each success and
each failure, then we can improve ourselves

Print Page | Close Window