Print Page | Close Window

installing factory switches

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29136
Printed Date: May 12, 2025 at 5:05 AM


Topic: installing factory switches

Posted By: nantan
Subject: installing factory switches
Date Posted: March 27, 2004 at 9:33 PM

hi, i have an 03 s-10 that came with manual doors, windows and mirrors. i have recently bought and installed oem power mirrors, window motors, door locks, switches and door panels. the only thing that i dont have is the harness that goes across the dash. i need to know how to wire all of these items using an auxillary fuse block and relays. a diagram with color codes would be perfect.

the drivers switch has

 driver and passenger up, down

driver and pass lock, unlock

driver and pass mirror adjustment (heated)

the passenger switch has regular up, dwn, lock, unlock

all together there are about one million wires, thanks in advance for the help




Replies:

Posted By: nantan
Date Posted: March 29, 2004 at 4:42 PM
come on guys, please help



Posted By: sparkie
Date Posted: March 29, 2004 at 8:44 PM
Go to your local GM dealer and see if they will print out schematics for the required components.
They may charge you a small fee, but it will be worth it. If you got the parts from a A/C Delco dealer they may be able to help.

-------------
sparky


Print Page | Close Window