how can i install a tachometer 02 accent

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29326
Printed Date: May 18, 2024 at 8:30 PM

Topic: how can i install a tachometer 02 accent

Posted By: Jonbr84
Subject: how can i install a tachometer 02 accent
Date Posted: March 30, 2004 at 12:54 PM

Does anyone know how to install my tachometer in my 2002 hyundai accent 2 door. if you have a site to show me a picture of the engine and which coil wire i splice into that would be great. of if you can send me a picture of the ECU and where its located that would be great to

Thanks

Jonathan

-------------
Jonathan jonbr84@hotmail.com

Replies:

Posted By: ammarsunfire
Date Posted: March 30, 2004 at 11:15 PM

Theres no need to splice the coil wire.

Use the tach wire at the ECM (Electronic Control Module). It's located UNDER DRIVERS DASH PIN 8, It's a grey colored wire. Verify it with a digital volt meter.

Posted By: Jonbr84
Date Posted: March 31, 2004 at 7:02 AM

whats the box look like? ive been under there a million times and have never noticed the emc... thanks

jonathan

-------------
Jonathan jonbr84@hotmail.com

Posted By: Jonbr84
Date Posted: March 31, 2004 at 2:42 PM

Which wire in the EMC in the 2002 hyundai accent is for the tach. which gray wire. anyone have a picture of it?

-------------
Jonathan jonbr84@hotmail.com

Print Page | Close Window