Thanks Velocity

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2992
Printed Date: July 07, 2025 at 7:28 PM

Topic: Thanks Velocity

Posted By: mobiletoys2002
Subject: Thanks Velocity
Date Posted: August 22, 2002 at 1:26 PM

here iu s a pic of it .

Replies:

Posted By: sparkyssb
Date Posted: August 22, 2002 at 3:01 PM

Hey Mobiletoys,

The picture didn't upload. You have it saved to your hard drive.
(c:/Documents%20and%20Settings/Owner/My%20Documents/My%20Pictures/traction/traction%20062.jpg)

You need to upload it somewhere then repost.

Take care.

Posted By: mobiletoys2002
Date Posted: August 22, 2002 at 4:37 PM

ok sparky thanks i did not realize. posted_image

Posted By: Velocity Motors
Date Posted: August 23, 2002 at 6:44 PM

Have you got the pic up yet ??

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mobiletoys2002
Date Posted: August 23, 2002 at 7:21 PM

well here is a pic before it goes in the car this is the guages cut into the real carbon fiber not stick on here. I think the left guage was cut a little low but it looks real good when installed on the dash of the 300 zx. I am going to try and get more pics when everything is done and installed in this beast. Oh by the way this is a 650 horse 300zx without nitrous. Anyways thanks again velocity for the info on cutting this, the holes are perfect.

Posted By: mobiletoys2002
Date Posted: August 23, 2002 at 7:34 PM

here is before guages were installed in.

Posted By: Velocity Motors
Date Posted: August 23, 2002 at 7:39 PM

NICE !! I like the clean installation.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mobiletoys2002
Date Posted: August 23, 2002 at 8:20 PM

thanks velocity i'll show the rest when it is done and everything is installed i think you will like .I have the valentine 1 going in ,The whole audio sytem,my custom fiberglass sub box,a whole array of gauges for the turbo"s and engine management system,hid conversition kit, traction control,well you get the point a lot of work in front of me. I'll keep you posted. Plus some tricked out lights from japan in the rear these things make homemade clear corners a joke lol see ya.