Print Page | Close Window

Wiring In ’91 Lumina

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30600
Printed Date: May 20, 2024 at 11:04 AM


Topic: Wiring In ’91 Lumina

Posted By: jrs362
Subject: Wiring In ’91 Lumina
Date Posted: April 18, 2004 at 11:39 AM

Hi

already took out the facotry stereo and disconnected all wires from it. Going to install pioneer stereo. My problem is, the original wires are in the plastic "plugs" that fit into the old connections. Should i just cut the wires so that the plastic is off and then connect the original wires or is there a way im supposed to connect the new wires to the plastic pieces?

Any suggestions?




Replies:

Posted By: NINsane18
Date Posted: April 18, 2004 at 7:56 PM
Never cut the factory harness. Go to Wal-Mart or any local stereo shop and get a wire harness to plug into the factory plugs. They are real cheap, and they make things a breeze.

-------------
Tim-May!



Posted By: Dauber
Date Posted: April 19, 2004 at 12:55 AM
As with the wiring harness that Ninsane18 said you should get, while your at that store grab a dash kit for your car as well, it will make your life alot easier and makes for a quicker install.

-------------
Kyle@Audio Obsession Sound



Posted By: NINsane18
Date Posted: April 19, 2004 at 5:16 PM
Good call Dauber, forgot to mention that.

-------------
Tim-May!


Print Page | Close Window