Labor rates

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30898
Printed Date: May 04, 2024 at 9:05 AM

Topic: Labor rates

Posted By: Coolhand
Subject: Labor rates
Date Posted: April 23, 2004 at 6:43 AM

How much are you guys charging for customer fiberglass per hour?

Replies:

Posted By: defective
Date Posted: April 23, 2004 at 10:13 AM

all depends...... if i'm doing just a plain jane tirewell flush, youd be looking at a flat rate, usually about $200. If i'm glassin' three 15's into a backseat area it's alot different. Think about if you were doing it yourself....it's stinky, annoying, and messy. Use $50 and hour as a rule of thumb, but it's always negotiable. Also remeber that every work of art starts with a crazy brainstorming phase, a concept sketch, and a good prototype drawing, to spec when time allowing. Haven't you ever watched Monster Garage? posted_image

-------------

Posted By: Teamrf
Date Posted: April 23, 2004 at 2:28 PM

65 dollars and hour....here in texas the wheater changes so much...it makes it hard for the crap to dry on some days..and other days it dries in no time.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: Coolhand
Date Posted: April 26, 2004 at 2:33 PM

So does that mean that I have to hire a professional auto illistrator? posted_image lol.

Thanks for the replies. Some people I talked to were saying upwards of $80 per hour

Posted By: Ravendarat
Date Posted: April 26, 2004 at 3:57 PM

I charge 50 bucks an hour or 300 dollars a day plus parts

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer