tachometer on an mx-3

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32190
Printed Date: May 07, 2024 at 8:21 PM

Topic: tachometer on an mx-3

Posted By: hawaiiboi
Subject: tachometer on an mx-3
Date Posted: May 15, 2004 at 12:18 PM

hey guys how do you put a tachometer on my mx-3???

Replies:

Posted By: deviousjoker
Date Posted: May 15, 2004 at 12:37 PM

connect the tach wire to the yellow/blue wire coming of your distributor.

Posted By: hawaiiboi
Date Posted: May 15, 2004 at 5:14 PM

do u know were the wire is, i cant find it, i look at my distriburetor and theres no yellow blue wire.

Posted By: profuse007
Date Posted: May 19, 2004 at 11:43 PM

when they say distributor wires, look for wires that comes from the coil.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: Greg S
Date Posted: May 24, 2004 at 11:38 AM

Depends if you have a V-6 or 4 cylinder engine. If a 4 banger then do as said above, if a V-6 then your best bet is at the ECU.

-------------
Greg Stoddard

Print Page | Close Window