2omh. resistor for steering wheel airbag

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32272
Printed Date: July 13, 2025 at 7:06 AM

Topic: 2omh. resistor for steering wheel airbag

Posted By: tommer2
Subject: 2omh. resistor for steering wheel airbag
Date Posted: May 17, 2004 at 2:10 AM

Waz up?

I need some help. I put a custom steering wheel on my truck and now my airbag light stays on. I read somewhere that I need to put a 2ohm resistor across the two wires that I unplugged. If I'm all wrong tell me what I should do!!!!!!!!!!!!!!! Come on you experts!!!! :errr:

Thom8D

Replies:

Posted By: tommer2
Date Posted: May 17, 2004 at 2:10 AM

Posted By: lspker
Date Posted: May 17, 2004 at 8:48 PM

The light came on because you disconnected the bag. If your going to connect anything across the wires BE SURE it is the right thing to do, you don't want to set off any other bags.

Posted By: audiocableguy
Date Posted: May 17, 2004 at 9:44 PM

Airbags make a difference. I'm alive because of one. If you disabled or eliminate the airbag expect some harsh comments from the experts. Cool looks won't matter if your dead! Your insurance company will need to know you eliminated the bag. Hope you think it's worth it.

Posted By: tommer2
Date Posted: May 18, 2004 at 9:52 PM

Yea,OK, Now about those resistors:::::::::::::::::::::::::::::::::::

Print Page | Close Window