Print Page | Close Window

engine control computer

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34988
Printed Date: May 12, 2025 at 4:50 AM


Topic: engine control computer

Posted By: tazmantr
Subject: engine control computer
Date Posted: July 03, 2004 at 10:03 AM

wireing diagrame for the engine controll computer i have a bad pin and need to trace what the wire gose to



Replies:

Posted By: auex
Date Posted: July 03, 2004 at 10:34 AM
Man I hope english isn't your primary language. What type of vehicle would help.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: tazmantr
Date Posted: July 03, 2004 at 11:43 AM
i"m sorry my spelling was off a little bit! i have a 1994 explorer limited. i keep burning up ecc"s and i need to back trace the wireing. any help would be nice ! thanks



Posted By: Mad Scientists
Date Posted: July 18, 2004 at 5:54 PM

If you're talking about the engine control module, your best bet would be to use a scan tool and find out why you're burning up modules.. there are probably 50+ wires on that ECM..  How many modules have you burned up? Where are they located?

 Jim


Print Page | Close Window