Print Page | Close Window

Wiring Sidemarkers

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35463
Printed Date: May 12, 2025 at 1:48 AM


Topic: Wiring Sidemarkers

Posted By: 94legend
Subject: Wiring Sidemarkers
Date Posted: July 12, 2004 at 2:04 PM

I do not have front signals cuz my front bumper was replaced

i plan on putting sidemarkers. where is the best place , what is the best model/brand

and how do i convert or connect the old bumper signal light to the side markers?




Replies:

Posted By: maglin
Date Posted: July 13, 2004 at 8:25 AM

kinda hard to comment here... i don't have a clue what sorta bumper it is you've put in the place of the stock bumper...

i've an older car, a 69, and i'm required to only have markers on the front.. not also on the sides like most modern vehicles.  not sure if the law is liquid, and applies differently to different cars...*Shrugs*  a bit more info here would help.

Does the replacement bumper have marker lamps already in it?  if the original bumper had markers in it it would make sense that the replacement would too...

~~Dan





Posted By: 94legend
Date Posted: July 13, 2004 at 2:39 PM

Ok here is the stock front bumper as u can see the signal lights are located on the front bumper.            

                     posted_image

Now when the front bumper was replaced with a VIS Cyber Front Kit .
The Bumper light wires were cut off Becuase there was no place to insert it but to
add sidemarkers.
posted_image






Print Page | Close Window