siren amp wiring help

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36135
Printed Date: July 12, 2025 at 7:52 PM

Topic: siren amp wiring help

Posted By: LSLFyrFytr
Subject: siren amp wiring help
Date Posted: July 25, 2004 at 12:47 PM

I originally had several accessories wired as shown in the diagram. My problem is that apparently the siren amplifier bleeds off voltage after the relay is switched off, so the strobe light and headlight flasher continue to be powered for a short duration, even after the switch is off.

Is there a way to prevent this from happening?

Thanks!

posted_image

Replies:

Posted By: auex
Date Posted: July 25, 2004 at 1:02 PM

Seperate relay for the siren amp would fix the problem.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window