power to lighting

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36324
Printed Date: May 07, 2025 at 1:50 AM

Topic: power to lighting

Posted By: Spectrespeed
Subject: power to lighting
Date Posted: July 28, 2004 at 1:53 PM

I am sorta getting surious as i add all my lighting into ny car, all the wires and stuff is annoying to have to wire all the way up to the front. I was wondering if there is something out there like a distribution block setup for lots of connections.

I want to run like a 10 gauge wire back to the rear for all my rear lightning to plug into and i dont wanna have to custom make something although i can. I was gunna design a circuit board to do that for me, but if there is something already sold out there like that, that would rock.

Thanks for all of your help guys.

-Spectre Speed

Replies:

Posted By: Spectrespeed
Date Posted: July 28, 2004 at 2:03 PM

Someone was telling me to make a diagram so someone could better understand what i was saying. So here is the diagram

Posted By: Spectrespeed
Date Posted: July 29, 2004 at 10:06 AM

Shall I take that as a...no body knows...

Thanks for reading it guys. I appreciate that. :)

Posted By: bdl666
Date Posted: July 31, 2004 at 2:53 AM

Sorry it took us so long!

I believe this is what you are looking for:

https://www.partsexpress.com/pe/pshowdetl.cfm?&PartNumber=263-510&DID=7

-------------
ieSpell rocks.

Posted By: Spectrespeed
Date Posted: August 03, 2004 at 2:05 AM

thanks, i appreciate it :D