’00 Olds Alero fan problem

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37614
Printed Date: May 13, 2025 at 9:39 PM

Topic: ’00 Olds Alero fan problem

Posted By: HotRod53F100
Subject: ’00 Olds Alero fan problem
Date Posted: August 17, 2004 at 7:41 PM

I realize that this is not audio install, but you guys know a little about everything. My brother-in-laws 00 Alero only has high speed on the AC blower, low and med are dead. Before he buys a new switch, something tells me that it may be a relay somewhere??? A friend had a Dakota with the same symptoms and it was a relay. Any guidence???

Update: I'm told that there is a resistor block somewhere inder the radio or under the glovebox that is a common problem.

Replies:

Posted By: furflier
Date Posted: August 19, 2004 at 7:25 PM

Here is a diagrahm of the location for resistor block assembly. Hope this helps.

-------------

Posted By: HotRod53F100
Date Posted: August 24, 2004 at 6:12 PM

Hey Furflier...there is no link, please try again..Thanks!

Posted By: furflier
Date Posted: August 24, 2004 at 8:24 PM

Ok, letstry this again. I am going to have to put this in 2 post , because of the size.

-------------

Posted By: furflier
Date Posted: August 24, 2004 at 8:28 PM

I have tried to post this twice. For some reason it will not upload the image. So pm me with your email & I will send it to you that way.

-------------

Posted By: auex
Date Posted: August 24, 2004 at 9:35 PM

You need to put the file extension in or the pic won't show up, https://www.the12volt.com/installbay/uploads/249_1.jpg

posted_image

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: furflier
Date Posted: August 25, 2004 at 11:02 AM

Where do I put the file extension at. I didn't see a place to put it. I thought all I had to do was tell it to uplaod the image. I am not all that great with computers. Is there a step by step instruction somewheres on this site.

-------------

Posted By: furflier
Date Posted: August 25, 2004 at 11:06 AM

HotRod item #8 is your resistor block. It is located just above the blower.

-------------