Boot Release kit
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38096
Printed Date: May 03, 2025 at 9:03 AM
Topic: Boot Release kit
Posted By: gloverk
Subject: Boot Release kit
Date Posted: August 25, 2004 at 4:42 PM
Im looking to find out how if there is a kit I can buy that will interface to my alarm so that when I press the accessory output button on the transponder, the boot opens ?
I have saw some kits on the net but when I emailed the co, they said I had to already have the cable boot release installed, I dont have this.
The car is a 99 BMW convertible, dont know if this makes a difference.
Replies:
Posted By: auex
Date Posted: August 25, 2004 at 5:50 PM
Do you have a button or a lever that will pop the "boot" or "trunk"?
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: kevlad
Date Posted: August 27, 2004 at 5:29 PM
No I dont have the lever. I have saw a couple of kits on the net but having the cable already there seems to be a pre requisite. ???!
Posted By: kevlad
Date Posted: August 27, 2004 at 5:31 PM
auex, the only button I have is on the remote. There is nothing in the car (oher than the button on the 'trunk' itself that will open it.
Posted By: kevlad
Date Posted: August 27, 2004 at 5:31 PM
auex, the only button I have is on the alarm transponder. Its a clifford alarm but the output has nothing to connect to at the moment. Hope this is what you meant? There is nothing in the car (oher than the button on the 'trunk' itself that will open it.
|