Wiring diagram need for Toyota LandCruiser LJ73 1986 year !!!
Thank you
Toyota | Land Cruiser | 1986-1987 |
Remote Starter Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Start: | | | BLACK/ WHITE | IGNITION SWITCH HARNESS |
Ignition #1: | | | BLACK / YELLOW | IGNITION SWITCH HARNESS |
Ignition #2: | | | BLACK / YELLOW | IGNITION SWITCH HARNESS |
Ignition #3: | | | N/A | |
Accessory: | | | BLUE/RED | IGNITION SWITCH HARNESS |
Brake Light: | | | GREEN / WHITE (+) | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | | BLACK | AT CHECK CONNECTOR MARKED IG- |
Parking Lights: | | | RED / GREEN | (+) AT RELAY OR AT LIGHT |
Headlights: | | | | |
OEM Alarm Disarm: | | | | |
OEM Alarm Arm: | | | | |
Diesel Glow Plug: | | | | |
Clutch Bypass Wire: | | | | |
| | |
Toyota | Land Cruiser | 1986-1987 |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | | Vehicle Color | Location |
Constant +12 Volts: | | | BLACK | IGNITION SWITCH HARNESS |
Starter Kill: | | | BLACK/ WHITE | IGNITION SWITCH HARNESS |
Ignition +12 Volts: | | | BLACK / YELLOW | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | | RED / WHITE | (-) AT PIN SWITCH |
OEM Horn: | | | | |
Power Lock: | | | N/A | |
Power Unlock: | | | N/A | |
Trunk Release: | | | | |
Alarm Input Wire: | | | RED / WHITE | (-) AT PIN SWITCH |
Please verify all circuit before actually hooking up the wires. This information is only a reference and it is your responsibility to make sure that the wires are correct. The wire colors above are for a Toyota Land Cruiser but not any specific model so please check all wires with a DMM.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA