2004 Jeep Liberty
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40603
Printed Date: May 16, 2024 at 11:29 PM
Topic: 2004 Jeep Liberty
Posted By: Dauber
Subject: 2004 Jeep Liberty
Date Posted: October 09, 2004 at 10:06 PM
I know some of you have done some of these veihlce for remote starters, so how is it you can get the trunk to work when only the factory remote will open it then when the aftermarket piece pulses the same wire, it opens it. So is there somewhere besides the BCM or driver's kick to trigger this wire to bypass this or is there a trick to it? If any one has any suggestion please let me know!
-------------
Kyle@Audio Obsession Sound
Replies:
Posted By: sparkie
Date Posted: October 10, 2004 at 11:52 AM
Use a negative pulse trigger on the ORANGE / pink wire at the upper plug for the BCM. Flip down the panel under the steering column. The BCM is in the fuse box. There are two plugs in the end closest to the firewall of the backside of the fuse box. These are for the BCM. You want the upper one.
-------------
sparky
Posted By: Dauber
Date Posted: October 11, 2004 at 1:40 AM
Thnaks for the info Sparky!
-------------
Kyle@Audio Obsession Sound
|