frequency ?

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41287
Printed Date: July 05, 2025 at 11:00 AM

Topic: frequency ?

Posted By: slow_hoe2001
Subject: frequency ?
Date Posted: October 20, 2004 at 9:31 AM

ok. i have a question and im hoping someone can help me out w/ it. i recently ported an enclosure that was reading a key frequency of about 42 hz while it was sealed. the specs that i used for the ports should have the ports tuned to about 35hz but when i get on a mic i get the best response out of 52hz. why is that? is there a "frequency" assigned to each vehicle that would change the frequency that you tune to? if so, how can u figure that # out?

Replies:

Posted By: boxmaker85
Date Posted: October 20, 2004 at 1:53 PM

Sometimes a computer's info compared to real-life info can differ. Always check you're work to see if what the computer gives you is right. In this case manythings can add to the difference (air pressure, air density, humidity, ect ect...). But that is a rather large difference. Hmmm.....

Print Page | Close Window