MECP test Q

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43595
Printed Date: July 19, 2025 at 10:06 AM

Topic: MECP test Q

Posted By: 1logan
Subject: MECP test Q
Date Posted: November 22, 2004 at 9:51 PM

I did a search of the forum and came up with no result, so I want to ask you guys who have taken the exam a question. Are there any of the schematic symbols that are located in the back of the study guide (on p.207) on the test. I apreciate your help.

Thanks,

Logan

Replies:

Posted By: auex
Date Posted: November 22, 2004 at 9:54 PM

No, no diagrams are on the test but the ones that you have to figure out.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: 1logan
Date Posted: November 22, 2004 at 10:02 PM

Thank you for your reply. One last question before I go. When covering Ohms Law the most important thing to remember is I=E/R...correct....If that's the case, then do I need to memorize the pie graph that includes P (power), the one with the square roots and all?

Posted By: auex
Date Posted: November 22, 2004 at 10:11 PM

What test are you taking?

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: 1logan
Date Posted: November 22, 2004 at 10:13 PM

The basic

Posted By: auex
Date Posted: November 22, 2004 at 10:15 PM

Well, the ohm's law will be basic. I would say try to memerize both. There will be questions like which formula is not correct.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window