Alarm Trouble shooting
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43630
Printed Date: July 17, 2025 at 6:14 AM
Topic: Alarm Trouble shooting
Posted By: epoliver
Subject: Alarm Trouble shooting
Date Posted: November 23, 2004 at 10:41 AM
I have a X treme xs-300 vehicle security system. The other day I ran my battery down trying to start my 2002 Mitsubishi Lancer after runing out of gas. (dont laugh) when the battery ran down low enough, so that the ignition was just clicking. Once I got the car going and the battery charged up, the alarm was totally out of sync. When i tried to arm the system, the doors would lock, but the lights took a few seconds to blink and the alarm didnt chirp. when disarming no chirp and all was out of sync. Is there some way of resetting the system?
-------------
Eric P. Oliver
Replies:
Posted By: SAR
Date Posted: December 03, 2004 at 5:55 PM
try putting it in and out of valet, or relearn the transmitter
Posted By: epoliver
Date Posted: December 04, 2004 at 4:43 AM
Hello and thank you. I did it the old fashioned way. I took it back to the guy who installed it. He ended up just putting in a new brain. But...I have another question. The guy had just put the same model, Extreme XS-300 in his suv and that's the one he gave me, but he had his set to silent mode. Meaning, of course the alarm would sound, but when arming or disarming, the chirps are silent. He forgot what the code was to cancel the silent and it does not show on my manual. Can you help?
-------------
Eric P. Oliver
|